상품상세 정보

[Teradek] Bolt 4K LT 3G-SDI MAX Set TX/RX (무선 영상 송수신기)

상품 정보
소비자가	0원
판매가	[가격문의]
할인판매가	(0원 할인)
할인금액	총 할인금액 원 (모바일할인금액 원)
적립금	0원(0%) 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 % 원 %
제휴적립금
배송방법	택배
배송비	3,000원 (50,000원 이상 구매 시 무료)
상품 추가설명 번역정보


배송	국내배송 해외배송
Bolt LT RX 추가
세트 업그레이드
배터리 플레이트

수량

사이즈 가이드

상품 목록
상품 정보	가격	삭제

총상품금액(수량) 0

할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.

구매하기예약주문

상세정보
구매안내
상품후기
Q&A

원본보기

Recipient of Scientific and Engineering Award from the Academy of Motion Picture Arts and Sciences. Learn More.

The Bolt 4K LT MAX TX/RX is a real time wireless video transmission system that supports video signals up to 4Kp30 via HDMI, and 1080p60 via SDI, at a distance of up to 5000+ ft line-of-sight, with less than 1ms of delay. Key features include increased range with lighter weight, faster reconnection times, easier setup with Bluetooth App for iOS or Android, and unlimited receivers using broadcast mode. These devices are cross-compatible with the entire Bolt 4K Family. This set includes both the Bolt 4K LT MAX TX and Bolt 4K LT MAX RX.

Zero-Delay 4K Wireless Video
Transmit and receive uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to and beyond 5000 + feet of range.

True HDR Color
Supports 10-Bit 4:2:2

Rock-Solid Reliability
Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.

Universal Compatibility
Send & receive signal to any Bolt 4K series RX/TX device for expanding workflow requirements.

Broadcast Mode
Supports Broadcast Mode which means you can connect unlimited receivers simultaneously. Broadcast mode also can increase your wireless video range to 5000 feet and beyond with the next-generation Array 4K Panel Antenna.

Transmitter:
Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)
Output: 1x 3G-SDI (up to 1080p60)

Receiver:
Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)

Camera Metadata
Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.

Bolt App for iOS and Android
Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand. *LUT/Color processing is not available through the Bolt App

What's In The Box?

1x Bolt 4K LT MAX TX
1x Bolt 4K LT MAX RX
1x Universal Ultra Arm Mini (1/4-20 & 3/8-16)
1x Lightstand Adapter 1/4-20in
1x Hot Shoe Adaptor
1x 18 Inch 2-pin Lemo to P-Tap Cable
1x 3 Foot USB Male Type A to USB Male Type B Cable
2x 18 Inch Ultra Thin HDMI Male Type A to HDMI Male Type A Cable
2x 10 Inch SDI BNC to SDI BNC Cable
1x 6 Foot 2-pin Lemo to 18W AC Adapter (International)
7x Antenna 2dBi V4.9-7.3GHz RP-SMA
3x Antenna 2dBi H Mushroom V4.9-7.3Ghz RP-SMA

Technical Specifications

Bolt 4K LT MAX TX

Video -

Video Inputs

3G-SDI SMPTE 424M standard/75 Ω (BNC x 1),
1x HDMI 1.4b Type-A receptacle

Video Outputs

3G-SDI SMPTE 424M standard/75 Ω (BNC x 1)

Sdi Ancillary Data Support

Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers.

Color Sampling

SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit

Delay Tx To Rx

<0.001sec

Input Cross Conversion

Yes, HDMI to SDI (4Kp30 HDMI input is scaled and looped out as 1080p30 on SDI loopout)

Supported Resolutions -

Supported Resolutions

Video Processing -

Video Compression

Visually Lossless

Video Format Conversion Support

Connect an HD source to the Tx and get a 4K signal out of Rx
Connect a 4K source to the Tx, get HD resolution out of Rx
You can also mix & match from a single source:
4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx
Input/output configurations are controlled directly on units or via Bolt 4K app

Color Correction

None

Audio Processing -

Audio Format

48kHz 24-bit PCM

Inputs -

Audio Input

Embedded SDI/HDMI Audio Input (2 Channel)

Outputs -

Audio Output

Physical -

Dimensions

2.4” x 4.1” x 1.3” (60 x 103 x 33mm)

Weight

7.3oz (206g)

Construction

Milled Aluminum(Chassis) and regulation-compliant PCB

Mountability

Multiple mounting options with 1/4"x20 and M3 holes

Interfaces -

Configuration Interfaces

OSD with Menu, Joystick Navigation

Switches

On/Off Switch

Mobile App

Bolt App

Desktop App

Bolt Manager application for OSX & Windows

Usb Interface Functionality

Upgrade via Micro-USB

Bluetooth

2.4 GHz

Network -

Antennas

2x External 2dBi antennas (included)

Wireless

Non-DFS Frequencies:
5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz
DFS Frequencies:
5.270 ~ 5.670 GHz

Channel Bandwidth

13x 40MHz wide channels

Rf Channel Selection

Auto, Manual
Manual available for non-DFS Channels

Encryption

AES-256, RSA-1024 key exchange

Rf Power

19 dbm EIRP (2x external 2dBi antennas; <80mW transmit power

Range

Up to 3000 ft line of sight (5000 ft with optional Bolt 4K Array Antenna)

Unicast Multicast

Can connect one Transmitter to up to 6 Receivers

Noise Rejection

Can coexist with WiFi and 5GHz cordless phones
Can operate up to 6 sets in same location

Power -

Power Input

2-Pin Circular locking Connector 6-28 VDC

Battery

None, optional Gold or V mount battery plate

Nominal Power Consumption

9 Watts

Environmental -

Operating Temperature

0-40℃

Bolt 4K LT MAX RX